<

xf881兴发官网

SZ CnAuto automation equipment Co., Ltd.

Specializing in the production of automatic\precision\high speed dispenser manufacturers

Hot Tel:

13928403389

Automated small pneumatic dispenser for threaded glue supply

编辑:马交易???日期:2018-12-05 08:07???浏览:

Small threaded pneumatic dispenser is suitable for threaded glue.
 
Thread glue is also known as anaerobic glue, mechanical glue, because it does not solidify in contact with oxygen, but it solidifies rapidly without contact with oxygen. Anaerobic means that no oxygen is needed in use. Because of its special nature, the general dispensing machine is difficult to meet the use of thread glue. However, due to the progress of science and technology, there are more and more kinds of dispensing machines. A dispensing machine suitable for threaded glue is also produced, which is a small threaded pneumatic dispensing machine.
 
331点胶机 331 point glue machine
 
Advantages of small threaded pneumatic dispenser:
 
1. Replacement of glue is fast and convenient, which can save a lot of labor costs.
 
2. Large-caliber steel pipe is used to feed glue at the conveying port of the product, and the anti-oxidant material is used for the hose, which is corrosion-resistant, pressure-resistant and not easy to rupture.
 
3. The machine is equipped with automatic pressure relief function.
 
4. There are two ways to control the switch: pedal and manual. The operation design is more humanized.
 
三轴点胶机 5. This small threaded pneumatic dispenser is suitable for the use of threaded glue.
 
Three axis dispenser
 
Product parameters:
 
Supply voltage: 220V
 
Power: 300W
 
Air source: 0.5-0.7 Mpa
 
Frequency of vomiting: 600/min
 
Minimum vomiting volume: 0.01ml
 
 
 
Matters needing attention:
 
1. This dispensing machine is suitable for dispensing of 2600 ml packaged silica gel, semi-flowing silica gel, sealant silica gel, heat dissipating paste, silicone oil, etc., and the production and processing of chemical products.
 
2. When production stops gluing operation, special attention should be paid to the sealing of the glue needle nozzle with transparent glue, so as to prevent air from entering the glue valve, so as to prevent the glue solidification in the glue valve from causing blockage.
 
3. When changing glue, be sure to lock all fasteners on the cover.
 
4. When the glue beater stops working for a long time, the packing drum in the pressure drum will remain motionless first. If you want to change the glue, you should replace it in a few minutes, so as to avoid the rubber pipe entering the air and causing the glue to solidify and clog.
 
Application area:
 
This dispensing machine is suitable for dispensing of 2600 ml packaged silica gel, semi-flowing silica gel, sealing silica gel, heat dissipating paste, silicone oil, etc., chemical products and mobile phone shell.


XML 地图 | Sitemap 地图